GuidesDesign and print

How to design a QR code that still scans

You can add color, a logo and a frame to a QR code, but a few limits decide whether it still works. Here’s what to keep in mind.

Why codes can be customized at all

QR codes carry spare information called error correction, which lets them survive scratches and dirt. That same spare capacity is what makes it possible to put a logo in the middle. There are limits though, and it’s easy to design a beautiful code that doesn’t scan.

Contrast matters most

Phones look for the difference between dark and light. Keep plenty of contrast, and be careful with two mid-tones. A dark color on a pale background is the safe choice.

Inverted codes, with light squares on a dark background, can look striking but fail on some phones. If you use one, test it widely.

Logos: small and centered

A logo replaces part of the pattern, so keep it to around a quarter of the code’s width and put it in the center. Don’t cover the three large squares in the corners, which is how a phone finds the code in the first place.

Dots, corners and frames

Rounded squares and soft corners generally scan well. Very round, separated dots leave more gaps and are harder for some readers, so check those carefully.

A frame with a few words, like “Scan for the menu”, costs nothing in reliability and tends to help, because it tells people what they’ll get.

Always test before printing

Scan the final design with more than one phone, at the size it will be printed, in the light it will be seen in. PikaQR’s design studio also reads each design as you change it and warns you when one may not scan, but nothing beats a real test on the real print.

Try it for free

Make a dynamic QR code in a minute. No credit card.

Make a free QR code

More guides

What size should a QR code be for print?How to print QR codes: a pre-print checklistDynamic vs static QR codes: which one do you need?How to make a QR code menu for your restaurant
How to design a QR code that still scans · PikaQR