GuidesQR code basics

QR code glossary: 27 terms in plain English

Short, plain definitions of the QR code terms you’ll meet, from alignment patterns and quiet zones to dynamic codes, redirects, UTM tags and webhooks.

A/B split

Sending a share of scans from one code to each of two or more destinations, such as half to one landing page and half to another. It lets you compare which page works better from the same printed code. It needs a dynamic code.

Alignment pattern

A small square, made of a dark ring with a single dark module in the center, found in every QR code from version 2 upward. Larger codes have several. They help the scanner correct for a code that’s curved, tilted or photographed at an angle.

Contrast

The difference in brightness between a code’s dark modules and its background. Scanners rely on it more than on anything else. Dark modules on a light background work best. Two similar shades, or light modules on a dark background, can fail on some phones.

Data module

One of the small squares that make up a QR code. A module is either dark or light, and the modules that aren’t part of a fixed pattern hold the code’s content and error correction. A code’s printed size divided by its number of modules across gives the module size, which decides how far away it can be scanned.

Deep link

A link that opens a particular screen inside an app, rather than its home screen or a website. A QR code can hold a deep link, so scanning it takes people straight to a product or booking page in your app if it’s installed.

Dynamic QR code

A code that stores a short link instead of the final destination. The service behind the short link sends each scan on, so you can change where the code goes after printing, count scans, and set rules. It works for as long as that service keeps it running.

Encoding mode

The way content is turned into bits inside a QR code. Numeric mode is for digits only, alphanumeric mode covers digits, capital letters and a few symbols, byte mode handles anything else, and Kanji mode is for Japanese characters. A code can switch modes to stay as small as possible.

Error correction level

How much spare information a code carries to survive damage. There are four levels: L (about 7% recoverable), M (about 15%), Q (about 25%) and H (about 30%). Higher levels are tougher but make a denser code.

Finder pattern

One of the three large squares in the top-left, top-right and bottom-left corners of a QR code. Each is a dark square inside a light ring inside a dark ring. Scanners look for them first to find the code and work out which way up it is, so they should never be covered by a logo.

Format information

A short strip of modules next to the finder patterns that records the code’s error correction level and mask pattern. It’s stored twice, so the code can still be read if one copy is damaged.

Frame

A border around a QR code, usually with a short call to action like “Scan for the menu”. A frame doesn’t change the code itself. It tells people what they’ll get, which tends to make them more willing to scan. Keep the quiet zone clear between the frame and the code.

Mask pattern

One of eight fixed patterns applied over a QR code’s data to break up large blocks of one color and shapes that look like finder patterns. The encoder tries all eight, keeps the one that will scan best, and records it in the format information so the reader can undo it.

Micro QR code

A smaller form of QR code with only one finder pattern, made for tiny labels such as those on electronic parts. It holds much less data, and many phone camera apps don’t read it, so it isn’t suited to codes meant for the public.

Quiet zone

The empty border around a QR code. The standard asks for four modules of plain background on every side. Text, pictures or the edge of the paper inside it can stop a code from scanning.

Quishing

Phishing that uses a QR code. The code leads to a fake page that asks for a password or card details. Common examples are stickers placed over real codes on parking meters, and emails asking you to scan a code to keep your account.

Redirect

Sending someone from one web address to another. A dynamic QR code’s short link redirects each scan to the current destination. The person usually doesn’t notice, because it happens in a moment.

Redirect rule

A condition that changes where a dynamic code sends a scan, such as the time of day, the date, the type of phone, the country or the phone’s language. For example, a restaurant can show its lunch menu until 3pm and its dinner menu after that from one printed code.

Scan analytics

Information about when and how a code was scanned, such as the time, the kind of device, the country and the phone’s language. Only dynamic codes can collect it, because the scan passes through their short link. It can’t tell you who someone is.

Short link

A brief web address that forwards to a longer one. Dynamic codes store a short link, which keeps the pattern simple, with fewer and larger modules that scan more easily at small sizes.

Static QR code

A code that stores its content directly in the pattern, such as a full web address or a Wi-Fi password. It never expires and needs no service behind it, but it can’t be changed after printing and can’t count scans.

SVG

A vector image format. An SVG QR code is drawn from shapes rather than pixels, so it stays sharp at any size. It’s the best file to send to a printer or a designer.

Timing pattern

Two lines of alternating dark and light modules, one running between the top two finder patterns and one between the left two. They let a scanner work out the size and position of every module in the grid.

UTM parameters

Tags added to the end of a web address, such as utm_source=poster and utm_campaign=spring, that tell web analytics tools where a visit came from. Adding them to a code’s destination lets you see scans in your own website reports.

vCard

A standard format for contact details: name, phone number, email, company and more. A vCard QR code holds those details, and scanning it offers to save them as a new contact. It’s a common choice for business cards.

Version

The size of a QR code’s grid. Version 1 is 21 by 21 modules, and each version adds four modules to each side, up to version 40 at 177 by 177. The more content a code holds, the higher its version.

Webhook

A message one service sends to another as something happens. For QR codes, a webhook can send each scan to your own software the moment it occurs, so you can log it, act on it or add it to your own reports.

Wi-Fi QR code

A code that holds a network name, password and security type. Scanning it offers to join the network, with no typing. It stops connecting if you change the password.

Try it for free

Make a dynamic QR code in a minute. No credit card.

Make a free QR code

More guides

Dynamic vs static QR codes: which one do you need?Do QR codes expire? Static vs dynamic explainedHow do QR codes work? A plain explanationHow to scan a QR code on iPhone and Android
QR code glossary: 27 terms in plain English · PikaQR